Design your own golf ball stamp
Your initials, a name, your own logo or a drawing — set them inside the round die, see them on the ball, and we make your personalised golf ball stamp to order: a pre-inked die flashed to your design, the ink built in, in a body that seats on the ball so the press lands square. One press marks a ball. No pen to carry, nothing to draw, and every ball in the sleeve gets the same mark. Plastic or metal, it is the same custom golf ball stamper underneath — what changes is what you hold.
Made to order and delivered in 7–14 days. UK delivery from £2.95.
Drag anything to move it. The Preview tab shows the ball as it will be stamped. When it says Good to go, press Add to basket.
Designs you can make
All six were made in the designer above, and are drawn here exactly as the die would press them — in the three inks we fill dies with. Your own letters, a name, a logo or a drawing go on the same way.
- Just the lettersTwo initials, as big as the die allows
- Inside a ringThe classic monogram, and the one that stamps cleanest
- Crossed clubsSays golf before anyone has read the letters
- A crownOr a flag, a tee, a golf bag or a laurel
- A name across itA big first initial with the name through the middle
- Split in twoOne initial each side of the slash
What you get
One personalised Ball Buddy plastic golf ball stamp, made to the design above: the die flashed to your picture, the ink built in, seated in a moulded plastic body, in a small card box. Ready to use — no pad, no pen, nothing else to buy. When the ink eventually fades it takes a few drops from the back.
It'll look like the preview
What you see in the Preview tab is the exact design the die is flashed from. If a stroke is too thin to hold ink on a dimpled cover, the designer says so and puts it right before you order.
Change your mind later?
Until the die is flashed, reply to your confirmation email and we'll swap the design. Sign in and your design is saved to your account to order again.
What a custom golf ball stamp is
A golf ball stamp is a small pre-inked die that presses a mark onto a ball in one go. The ink is held in the foam of the die itself rather than on a separate pad, so there is nothing to carry, nothing to open and nothing to dry out in a golf bag: set it on the ball, press once, lift it straight up. A golf ball stamper of this kind takes a few hundred presses before it fades, and then takes a few drops of ink through the back to bring it round again.
What makes it custom is the die. An off-the-shelf stamper presses whatever picture the factory cut into it — a dog's paw, a shamrock, a smiley face — and thousands of other golfers have the same one. A personalised golf ball stamp is made to a design you set yourself, which is what the designer above is for: type your initials, pick a style, or send us your own logo, and that exact artwork is flashed into the foam of a die that is made for you and nobody else.
Why the mark is round, and why it is this size
A golf ball is a sphere, so only a small disc of it is flat enough to take an even impression — press a bigger die and the middle lands heavy while the edges barely touch. A 16 mm die is about the largest mark that sits inside that flat area with a margin to spare, which is why almost every golf ball stamp on sale is somewhere near it, and why we make one size rather than asking you to guess.
What you can put on one
Initials and monograms
Two or three letters is what most people want, and what a round die suits best. The designer lays them out in the styles that actually stamp cleanly — inside a ring, over a pair of crossed clubs, in a shield, split by a diagonal, or as a name bar with a large first initial and the name across its middle. It fits the letters to the die as you type, so you cannot build something that comes out as a smudge. Our guide to golf ball monogram stamps goes through each style and how many letters it holds.
A name or a nickname
A short name reads well across the middle of the die in a narrow font, and a nickname usually reads better than a full one — it is shorter, it is yours, and it gets a reaction in the fourball. Anything past about six letters is better as a name bar than as a single line, and the designer will tell you in plain words how many letters will fit rather than silently shrinking them.
Your own logo, badge or drawing
You can upload a logo, a crest, a signature or a line drawing and we trace it to a clean single-colour mark, with the traced version shown to you before you order. A photograph will not work and the designer refuses one: a die presses one colour of ink with no shades, so a photo comes out as a blot. What we also cannot make is a club crest, a ball maker's mark or anyone else's brand, however small — that is theirs, not ours to cut.
Plastic or metal?
Both stamps press exactly the same mark. Same die, same ink, same design, same size — nothing about what lands on the ball changes between them. What you are choosing is the barrel you hold and how long you want it to last.
| Plastic | Metal | |
|---|---|---|
| Price | £9.99 | £14.99 |
| Body | Moulded plastic, bright colour | Machined metal, brushed finish |
| In the hand | Almost weightless | Heavy enough to press itself |
| Best for | Trying one, and carrying it | Keeping it, and giving it |
| The mark it makes | Identical — same 16 mm die, same ink, same design | |
Plastic golf ball stamp, £9.99 · Metal golf ball stamp, £14.99
How it arrives, and how long the mark lasts
It comes made up and inked in a small card box, ready to use — no pad, no pen, nothing else to buy. Made to order and delivered in 7–14 days, because the die is made to your design rather than picked off a shelf.
On the ball, stamp ink sits on the surface of the cover rather than soaking into it, so a stamped mark lasts one to three rounds before it is worth doing again — less where the club face strikes it. That is the trade against a stencil and a permanent marker, which takes longer to put on and lasts several rounds longer. Stamping a ball again takes a second, so most people simply do the sleeve again. There is a fuller comparison in golf ball stamp vs stencil, and how to stamp a golf ball covers getting a clean press first time.
The designs on the stamps above are examples of what a die can hold. Every Ball Buddy stamp is made to your own design — we do not sell the pictures shown.
Questions UK golfers ask about golf ball stamps
Does a golf ball stamp smudge?
A freshly stamped golf ball smudges if it is handled in the first minute, because the ink sits on the cover while it dries rather than soaking in. Press once, lift straight up, and give the ball a minute on the tee or the towel before it goes in the bag. Once dry the mark survives a round of handling and a damp fairway, though a hard rub with a wet towel will lift it.
How long does a stamped mark last on a golf ball?
A stamped mark on a golf ball lasts one to three rounds before it fades enough to want doing again, less where the club strikes it. It sits on the surface of the cover, so it wears faster than a permanent-marker line drawn through a stencil. Stamping it again takes a second, which is the trade: quicker to put on, quicker to come off.
Can I put my own logo or drawing on a golf ball stamp?
You can put your own logo, badge or line drawing on a Ball Buddy golf ball stamp: upload it in the designer, it is traced to a clean single-colour mark, and you tick to confirm it is yours to use — a photograph will not work, because a die presses one colour of ink with no shades. What we cannot make is a football club crest, a ball maker's mark or any other brand that belongs to someone else, however small. Initials, a name, a simple drawing and the built-in ornaments are all fine.
Is the plastic golf ball stamp any worse than the metal one?
The plastic and metal golf ball stamps press exactly the same mark: the same die, the same ink and the same design, so nothing about what lands on the ball changes. What you pay more for in metal is the barrel — it is heavier, so it presses under its own weight and takes years of being thrown in a bag. Pick plastic to spend less and carry less, metal to keep it a long time or to give it as a present.
What fits on a 16 mm golf ball stamp?
A 16 mm die holds two or three initials with a ring round them, a short name, or a simple logo or drawing — all of it reading clearly from a putt's length. It is the size most golf ball stamps are, because it is the largest mark that still sits inside the flat of a golf ball's curve with a margin to spare. The designer fits your letters to the die as you type and tells you if you have asked for more than will fit.
Which ink colour should I pick, and does it run out?
Black ink reads on any golf ball and is the safe choice for a yellow one; blue and red stand out best on a white cover and are easier to spot on the green from a few paces. The ink is built into the die when the stamp is made, so there is no pad to buy or carry. When it eventually fades, after a few hundred presses, a few drops of stamp ink on the back of the die bring it back.
How to stamp a golf ball so it doesn't smudge · Monogram styles that stay sharp · Stamp vs stencil